freecad no module named webgui как исправить

20.07.202219.07.2022 admin 0 Comments

FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Please Login to Comment

I posted this to the FreeCAD forum a few days ago, but so far no one has offered any assistance. I thought maybe someone here might know a solution?

I ram FreeCAD with no problems under Ubuntu 16.04 in the past. I recently decided to try learning it again. I’m now running Ubuntu 18.04, however. I tried installing FreeCAD from the repositories and when I started FreeCAD, it came up with a «No module named WebGui» error. From searching that error, I found that there was an issue with the version in the repository and that installing from the PPA was the solution. So, I added the PPA and then installed FreeCAD from there. Everything seemed to go ok last night. Remember, I am a novice to FreeCAD so only after watching a few tutorials last night did I learn about Sketcher. So, today, I tried to use Sketcher and every time I clicked ok selecting the X-Y Plane, FreeCAD crashes. I found a few hits on duckduckgo including one about this possibly being related to a graphics card issue. I tried the suggestions there regarding [export LIBGL_DRI3_DISABLE=1] and [ export «LIBGL_ALWAYS_SOFTWARE=1»] but it still crashes every time I try to use Sketcher. I know that the graphics card in this laptop apparently doesn’t support OpenGL(? I think) so it’s possible that this is the issue. Is there anything that I can do to get this running properly?

OS: Ubuntu 18.04.2 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.
Build type: Release
Python version: 2.7.15rc1
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)

When I try to paste the exact error that comes up when FreeCAD crashes, it totally screws up this text. I will attach it as a text file.

Источник

Freecad no module named webgui как исправить

Post by drmacro » Fri Oct 23, 2020 12:44 pm

Recompute and save file (in 0.19) fixes it.

OS: Ubuntu 20.04.1 LTS (XFCE/ubuntustudio)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Branch: unknown
Hash: 0001cb0fb4bbe2c94e06339e89cc476545c6fc00
Python version: 3.8.5
Qt version: 5.12.8
Coin version: 4.0.0
OCC version: 7.3.0
Locale: English/United States (en_US)

Star Trek II: The Wrath of Khan: Spock: «. His pattern indicates two-dimensional thinking.»

My beginners, written treatise: Learning FreeCAD

Re: No module named

Post by sgrogan » Fri Oct 23, 2020 1:22 pm

Re: No module named

Post by drmacro » Fri Oct 23, 2020 1:27 pm

Star Trek II: The Wrath of Khan: Spock: «. His pattern indicates two-dimensional thinking.»

My beginners, written treatise: Learning FreeCAD

Re: [solved] No module named

Post by davidgleach » Fri Jun 04, 2021 5:31 am

I have similar issue. I use a small notebook to drive my 3D printer. The notebook uses Windows10 32 bit. As I cannot find a Windows 10 32 bit version for FreeCad 0.19, I use FreeCad 0.18 on the notebook. If I try to open a file that was created in FreeCad 0.19 by using FreeCad 0.18, I get the following error message:-

Invalid Document.xml: End of document reached
No extension found of type ‘PartGui: :ViewProviderAttachExtension’
: No module named mTempoVis[/color]

Any help would be appreciated

Re: [solved] No module named

Post by davidgleach » Fri Jun 04, 2021 7:25 am

Re: [solved] No module named

Post by chrisb » Fri Jun 04, 2021 11:56 am

Re: [solved] No module named

Post by GeneFC » Fri Jun 04, 2021 1:59 pm

Actually, the issue is completely different. The original problem was simply a changed name for a module.

The issue you brought up is that there was a significant change to the Sketcher in late 2020. This change made important compatibility changes. Files created with FC 0.18.xxxx can be read with FC 0.19.xxxx and later, but files made with FC 0.19.xxxx cannot be read with any previous versions. The file structure was changed, and there is no way to make the new files readable by old versions.

Источник

No module named ‘WebGui’ #37

Comments

incal commented Mar 28, 2020 •

Hello,
I followed the whole installation procedure on Macos Sierra, but I have this problem

`FreeCAD 0.18, Libs: 0.18R16146 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2019

No module named ‘WebGui’`

The text was updated successfully, but these errors were encountered:

We are unable to convert the task to an issue at this time. Please try again.

The issue was successfully created but we are unable to update the comment at this time.

looooo commented Mar 28, 2020

please install freecad (whatever version) from the freecad/label/dev channel if you care about the webmodule. For using freecad it’s not mandatory to have the webmodule available.

Anyway this issue will be solved with 0.19 release.

incal commented Mar 29, 2020

hi,
thank’s for reply
unfortunately I break may conda installation:

UnsatisfiableError:
`
can you help me?

looooo commented Mar 29, 2020 •

interesting. I don’t see a reason why it should fail. Is there some additional information printed? If so, please add it.

incal commented Mar 29, 2020 •

i am new of conda environment
how can I provide more information about it?

packages in environment at /Users/incal/miniconda3:

looooo commented Mar 29, 2020 •

Normally there should be a list of conflicting packages if conda create fails.

Btw. we are running the conda create command daily to create the freecad bundles
for (win, linux, osx) and this was working today, so I don’t think this is a general issue.

You can also try to create an environment with one of the base dependencies like pivy, occt, boost and see if this also leads to conflicts. If it does try to do the same with one of them to see which one leads to conflicts.

incal commented Mar 29, 2020

PackagesNotFoundError: The following packages are not available from current channels:

To search for alternate channels that may provide the conda package you’re
looking for, navigate to

and use the search bar at the top of the page.`

looooo commented Mar 29, 2020

please post the output of:

maybe there is the conda-forge channel missing?

incal commented Mar 29, 2020 •

Yes you are right
I must have done something wrong

now works! thank you very much!

incal commented Mar 29, 2020 •

do you know why ai cannot use Inventor Loader module?

I was already using FreeCad for my projects, but I need to import some Inventor models, that’s why I tried the conda installation

looooo commented Mar 29, 2020

try to install the missing modules?
conda install xlutils xlrd xlwt olefile

incal commented Mar 29, 2020

conda install xlutils xlrd xlwt olefile
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: /
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.
failed

UnsatisfiableError: The following specifications were found
to be incompatible with the existing python installation in your environment:

looooo commented Mar 29, 2020

Seems like one of those packages conflicts with installed versions. Again try to Install one by one.

incal commented Mar 29, 2020

conda install xlutils
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: /
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.
failed

UnsatisfiableError: The following specifications were found
to be incompatible with the existing python installation in your environment:

looooo commented Mar 29, 2020

xlutils isn’t available on conda-forge. But you can install it with pip (the conda-env where you want the package must be activated):
pip install xlutils

looooo commented Mar 29, 2020

incal commented Mar 29, 2020 •

something still goes wrong with the modules install:

Traceback (most recent call last): File «/Users/incal/miniconda3/envs/freecad_test/Mod/AddonManager/addonmanager_workers.py», line 645, in run repo = git.Repo.clone_from(self.repos[idx][1], clonedir, branch=’master’) AttributeError: module ‘git’ has no attribute ‘Repo’

looooo commented Mar 30, 2020

Maybe you can post the output of conda list with the freecad_test environment activated.

incal commented Mar 30, 2020

hi,
I have already tried to install git but nothing change:
`(freecad_test) ➜

conda install git
Collecting package metadata (current_repodata.json): done
Solving environment: done

All requested packages already installed.

this is my conda list:

packages in environment at /Users/incal/miniconda3/envs/freecad_test:

looooo commented Mar 30, 2020

As it seems gitpython is not installed with conda, it’s possible your system installation of gitpython is used and leads to this conflict as it might be an incompatible version.
conda install gitpython

incal commented Mar 30, 2020

wonderful, it’s works!!
thank you very much

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источник

Freecad no module named webgui как исправить

Also, be nice to others! Read the FreeCAD code of conduct!

FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by rebeltaz » Wed Apr 03, 2019 5:15 pm

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by Synchro » Sat Apr 06, 2019 8:49 am

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by rebeltaz » Sat Apr 06, 2019 5:31 pm

I’d still like to know why this happen(ed/s) but until/unless an answer can be provided, this will at least get you up and running.

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by Kunda1 » Sat Apr 06, 2019 6:34 pm

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by NormandC » Sun Apr 07, 2019 3:08 am

If it didn’t support OpenGL, FreeCAD would not even launch, it’s a basic requirement. One of the problems is that some graphics chipsets only support an extremely old version of OpenGL.

Those issues are hard to pin down and require a FreeCAD developer with knowledge of these things. I wonder if their count is bigger than one!

I’m puzzled by the influx of crash issues, FreeCAD remains very stable for me.

I’m using the package from the freecad-stable PPA which was just updated to 0.18.1 today.

OS: Ubuntu 18.04.2 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.1.
Build type: Release
Python version: 3.6.7
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/Canada (fr_CA)

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by kkremitzki » Sun Apr 07, 2019 3:13 am

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by rebeltaz » Sun Apr 07, 2019 4:32 am

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by NormandC » Sun Apr 07, 2019 2:28 pm

It may also be relevant to provide details on your graphics card, maybe that will help figure out the issue.

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by rebeltaz » Wed Apr 24, 2019 5:58 pm

It may also be relevant to provide details on your graphics card, maybe that will help figure out the issue.

/.FreeCAD directory. As for the graphics card:

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Post by mmalone » Tue Mar 24, 2020 5:17 pm

FreeCAD is just busted (edit: out of the box) on Ubuntu 18.04. Specifically, I am using 18.04.04 and the metacity gnome window manager. I tried it 7 different ways: ( Edit: For the solution, skip to step 6 below. )

It seems obvious to me that there is something wrong with the way that FreeCAD is trying to access the libraries, or the libraries I have.

I would appreciate it if there was a freecad-justworks release. I do not care if it has all of the latest features or bug fixes. If it cannot even start, I cannot even start to form an opinion about freecad.

I would appreciate any assistance to explain the problem. Part way through the process, I posted on the Ubuntu forums here:

Here is an (edit the errors in my config are highlighted in red, the correct files they should point to are in green) :

Источник

How to install Free CAD on Ubuntu 18.04

To install Free CAD on Ubuntu 18.04
Free cad is a free and open source general-purpose parametric 3D CAD modeller.it is widely used in mechanical engineering and product design fields. In this tutorial, we will cover the installation of free cad on Ubuntu 18.04.

Install the Free CAD application.

Once Installation is done you can access the free cad from the Menu as shown here Free CAD application.

Comments ( 1 )

Frequently asked questions ( 5 )

What is the easiest way to install FreeCAD on my system?

If you are on Debian, Fedora or Ubuntu and some other distributions, FreeCAD is already included in the standard software repositories and you can simply install it with the software manager. On Ubuntu, the FreeCAD team also maintains its own PPA repositories

What are the prerequisites for running FreeCAD?

What if I want to compile FreeCAD myself?

The source code of FreeCAD is always available in the project source code repository. Compiling FreeCAD yourself allows you to use the most recent features being developed, but requires a bit of computer knowledge, although the procedure is fairly simple

All the main required components are usually bundled within your FreeCAD installation or provided by your package manager, so normally you have nothing to worry about. If you installed FreeCAD from unofficial sources, however, or compiled FreeCAD yourself, some piece might be missing, which is not critical to FreeCAD itself, but might cause some functionality to be unavailable. Some specific file formats such as Collada or DWG also require extra components, which cannot be bundled into FreeCAD, and must be installed by yourself separately.

Most startup crashes occur because of one of the two following reasons:

OpenGL drivers are not installed, or not working properly
Some library, needed by FreeCAD, is not present on your system, or wasn’t found by FreeCAD

= 5 || postCtrl.tagPost[‘tutorials’].current_page» ng-bind-html=»postCtrl.showtype1[‘tutorials’] | unsafe»>

= 5 || postCtrl.tagPost[‘forums’].current_page» ng-bind-html=»postCtrl.showtype1[‘forums’] | unsafe»>

= 5 || postCtrl.tagPost[‘news’].current_page» ng-bind-html=»postCtrl.showtype1[‘news’] | unsafe»>

I got a new laptop recently and am just learning linux. It runs great and im learning a lot, but I have one problem with the hardware. Im used to the backspace being the most upper right key. Whenever I try to hit the backspace, I end up hitting home and returning the cursor to the begining of the line. I was wondering if there was someway to change the home key to become backspace as well. I never use the home function and would rather have an extra backspace or even a key that does nothing, than a key that moves my cursor away from the mistake and doesnt erase it. Is there anyway to either make the home button also backspace, or just do nothing?

Источник

FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Please Login to Comment

Freecad no module named webgui как исправить

Re: No module named

Re: No module named

Re: [solved] No module named

Re: [solved] No module named

Re: [solved] No module named

Re: [solved] No module named

No module named ‘WebGui’ #37

Comments

incal commented Mar 28, 2020 •

looooo commented Mar 28, 2020

incal commented Mar 29, 2020

looooo commented Mar 29, 2020 •

incal commented Mar 29, 2020 •

packages in environment at /Users/incal/miniconda3:

Name Version Build Channel

looooo commented Mar 29, 2020 •

incal commented Mar 29, 2020

looooo commented Mar 29, 2020

incal commented Mar 29, 2020 •

incal commented Mar 29, 2020 •

looooo commented Mar 29, 2020

incal commented Mar 29, 2020

looooo commented Mar 29, 2020

incal commented Mar 29, 2020

looooo commented Mar 29, 2020

looooo commented Mar 29, 2020

incal commented Mar 29, 2020 •

looooo commented Mar 30, 2020

incal commented Mar 30, 2020

All requested packages already installed.

packages in environment at /Users/incal/miniconda3/envs/freecad_test:

Name Version Build Channel

looooo commented Mar 30, 2020

incal commented Mar 30, 2020

Freecad no module named webgui как исправить

FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

Re: FreeCAD Crashing/Issues On Ubuntu 18.04 LTS

How to install Free CAD on Ubuntu 18.04

Comments ( 1 )

Frequently asked questions ( 5 )

= 5 || postCtrl.tagPost[‘tutorials’].current_page» ng-bind-html=»postCtrl.showtype1[‘tutorials’] | unsafe»>

= 5 || postCtrl.tagPost[‘forums’].current_page» ng-bind-html=»postCtrl.showtype1[‘forums’] | unsafe»>

= 5 || postCtrl.tagPost[‘news’].current_page» ng-bind-html=»postCtrl.showtype1[‘news’] | unsafe»>

Вам также понравится

Черное прямое платье с чем носить

Сохранение данных в файл php

Резиновый стейк как исправить

Добавить комментарий Отменить ответ