htaccess invalid command php value

При работе веб-сайта вы можете столкнуться с ошибками:

У всех этих ошибок одинаковая причина, хотя и текст сообщения может чуть различаться.

При этом сайт выдаёт малоинформативное сообщение о проблемах с сервером, а именно ошибку 500 Internal Server Error. То есть для выяснения истинной причины проблемы нужно обратиться к логам веб-сервера, в первую очередь к логам ошибок.

На странице веб-сайта при этом отображается:

Если заглянуть в журнал доступа веб-сервера и в логи ошибок веб-сервера Apache, то там будет показано примерно следующее:

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

Проблема вызвана директивами контроля доступа (они используются для блокировки пользователей по IP, например). В Apache 2.2 используются директивы Allow, Deny и Order, которые обеспечиваются старой версией модуля mod_access_compat. Для версии Apache 2.4 они являются устаревшими и будут убраны в будущих релизах Apache. Если вы столкнулись с приведёнными выше ошибками, значит ваша версия Apache уже не поддерживает работу с ними.

Решить эту проблему очень просто — удалите все записи с Allow, Deny и Order из файлов .htaccess. Чтобы продолжить блокировать IP адреса, сделайте это с помощью новых директив.

Например, чтобы закрыть доступ к сайту с определённых IP адресов используйте следующую конструкцию:

Другие подробности и примеры блокировки по IP и разрешению доступа по IP вы найдёте в статье «Контроль доступа к сайту (блокировка по IP, User-Agent)».

Источник

Comments

NeilANand commented May 25, 2015

Does anyone know what I’ve done incorrectly here?

The text was updated successfully, but these errors were encountered:

We are unable to convert the task to an issue at this time. Please try again.

The issue was successfully created but we are unable to update the comment at this time.

jtreminio commented May 25, 2015

More than likely a PHP error. What’s the error log say?

NeilANand commented May 25, 2015

Thanks for the quick response, where on the vagrant box should I look for the error log? I tried /var/log/apache2/error.log but the errors in there don’t seem related to this unless I’m mistaken

jtreminio commented May 25, 2015

Puphpet uses php-fpm which has its own separate error log.

/var/log/php-fpm.log or /var/log/php5-fpm.log

NeilANand commented May 25, 2015

I’ve checked both of those but they are empty, so I’m guessing it’s not a PHP issue?

thiagotalma commented May 26, 2015

Not everything is a Puphpet problem.

Always remember that the Puphpet is just a compilation of third party modules. Most often the problem is the configuration of these modules.

NeilANand commented May 26, 2015

stiig commented May 28, 2015

NeilANand commented Jun 14, 2015

@stiig Sorry for taking so long to get back to you but that looks like just what I need.

tomasdev commented Sep 8, 2016

Yes, just make sure you’re using and don’t install the module.

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источник

.htaccess: Invalid command ‘RewriteEngine’, perhaps misspelled or defined by a module not included in the server configuration

I have this error when trying to browse php files locally

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

8 Answers 8

Under Apache 2+ you can simply do as below (Using Linux Terminal):

or defined by a module not included in the server configuration

Check to make sure you have mod_rewrite enabled.

If the LoadModule rewrite_module modules/mod_rewrite.so line is missing from the httpd.conf file entirely, just add it.

Sample command

To enable the module in a standard ubuntu do this:

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

Just Follow Simple 1-2-3 Steps :

2) Click on WAMP icon (Left Click)

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

I can see that your using AppServ, mod_rewrite is disabled by default on that WAMP package (just googled it)

Solution:

Find: C:/AppServ/Apache/conf/httpd.conf file.

and un-comment this line #LoadModule rewrite_module modules/mod_rewrite.so

Restart apache. Simplez

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

This comment from verybadbug under question helped me:

After that we need restart Apache:

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

Also make sure php is enabled by uncommenting the

line that comes right after

Make sure both those lines in

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

Steps to start Apache httpd.exe (I am using x64 VC11 example here)

Be sure that you have installed Visual C++ Redistributable for Visual Studio 2012 : VC11 vcredist_x64/86.exe

You may need to have Visual Studio 2012 Update 3 (VS2012.3)

Unzip httpd-2.4.4-win64-VC11.zip and copy paste in

Unzip modules-2.4-win64-VC11.zip and copy paste them in

un-comment (remove # sign) starting below this like copy pasted list in here

and double click on it.

Then in Command Prompt (CMD.exe) type

and press enter. It shows any error remaining.

Build with the latest Update 3 Visual Studio® 2012 aka VC11. VC11 has improvements, fixes and optimizations over VC10 in areas like Performance, MemoryManagement and Stability. For example code quality tuning and improvements done across different code generation areas for «speed». And makes more use of modern processors and win7, win8, 2008 and Server 2012 internal features.

The VC11 binaries loads VC11, VC10 and VC9 modules, and does not run on XP and 2003. Minimum system required: Windows 7 SP1, Windows 8 / 8.1, Windows Vista SP2, Windows Server 2008 R2 SP1, Windows Server 2012 / R2

After you have downloaded and before you attempt to install it, you should make sure that it is intact and has not been tampered with. Use the PGP Signature and/or the SHA Checksums to verify the integrity.

Источник

Invalid command ‘php_value’, perhaps mis-spelled or defined by a module not included

milindras

Member

Hi,
I have a newly build web server using cpanel 11.28.64. & OS is centOS.
Before go live I wanted a test a website & I copied the files from my current ubuntu web server.
But when I tryto access the site I am getting the Internal Server Error + getting the following error on apache error log.

«Invalid command ‘php_value’, perhaps mis-spelled or defined by a module not included in the server configuration»

Default PHP Version (.php files) 5
PHP 5 Handler suphp
PHP 4 Handler none

What do you recommend?

JaredR.

Well-Known Member

Re: Invalid command ‘php_value’, perhaps mis-spelled or defined by a module not inclu

Instead, use a custom php.ini file. Copy /usr/local/lib/php.ini to the directory that requires custom PHP values, and customize the PHP values in the «local» php.ini file. Note that the values in custom php.ini files are not «inherited» to subdirectories. If you place a custom php.ini file in /home/someuser/public_html, its settings will not be inherited by /home/someuser/public_html/somesubdir. /home/someuser/public_html/somesubdir would need its own custom php.ini file.

milindras

Member

Re: Invalid command ‘php_value’, perhaps mis-spelled or defined by a module not inclu

Instead, use a custom php.ini file. Copy /usr/local/lib/php.ini to the directory that requires custom PHP values, and customize the PHP values in the «local» php.ini file. Note that the values in custom php.ini files are not «inherited» to subdirectories. If you place a custom php.ini file in /home/someuser/public_html, its settings will not be inherited by /home/someuser/public_html/somesubdir. /home/someuser/public_html/somesubdir would need its own custom php.ini file.

Many Thanks for the reply.

Is there any alternative method to enbale to use those directives? Something like change the PHP handler to a diff one?

Источник

Error in custom php.ini: «Invalid command ‘php_value’, perhaps misspelled or defined by a module not included in the server configuration»

I currently have dedicated server which runs WHM/cPanel.
I ran into as issue after uploading my project to my webroot. The error:

My question is:
Is there any way to run the custom php.ini to get my project running?
I tried to edit the php-70u (which I’m running on my server) to edit my custom php.ini file.
But that didn’t work for some reason. Could i get a helping hand?

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

1 Answer 1

You should use the MultiPHP Editor from WHM. You can define a custom php version for each of your cPanel accounts. Then from the cPanel web interface of your account you can edit/adjust your php settings accordingly. Just search for PHP in cPanel. These settings should be performed using the cPanel/WHM interface and not by manually editing the files on your server. Manually edited files (via ssh/ftp etc) will be overwritten anyway when you do a change via cPanel or WHM.

htaccess invalid command php value. Смотреть фото htaccess invalid command php value. Смотреть картинку htaccess invalid command php value. Картинка про htaccess invalid command php value. Фото htaccess invalid command php value

Not the answer you’re looking for? Browse other questions tagged php cpanel ini or ask your own question.

Linked

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

site design / logo © 2021 Stack Exchange Inc; user contributions licensed under cc by-sa. rev 2021.9.16.40232

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Источник

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *