pdo postgresql php install
Connecting to PostgreSQL with PHP
Let’s look at how we can use PostgreSQL with PHP.
I will not talk about why you should use PostgreSQL over Mysql, and this article is not about how you can install PostgreSQL on your system.
How to connect to PostgreSQL
There are two ways that you can connect to PostgreSQL with PHP;
We’ll use PDO Driver which is simpler than Pgsql Extension.
Installing PDO Driver
On Ubuntu you can install with one line command.
This will install PDO pgsql driver.
On Windows you just need to edit php.ini
find this line and remove “;”.
If you are using WAMP server, after enabling the POD PostgreSQL driver, it is still not working and you got the following error message:
You can put the following line:
At the end of the httpd.conf file in the C:\wamp\bin\apache\apache2.2.22\conf folder.
Connection to PostgreSQL
Once the driver is installed, you can connect as following;
if that does not work try that way;
Connect to Docker PostgreSQL Container
Unless you use Docker you can skip this section.
All you have to do is put your docker name instead of localhost
For example, this is my docker file;
and this is how i connect to PostgreSQL;
Be Careful
When you use PostgreSQL instead of Mysql and you are a beginner of Pgsql you might have issue with LIMIT statement.
You probably used LIMIT statements like below when using Mysql.
but PostgreSQL does not support this statement; You have to use like that;
you better use this way always because this is a ANSI statement which is supported almost every sql server.
PHP: PDO быстрый старт, работа с MySQL
Содержание:
PDO (PHP Data Objects) — расширение PHP, которое реализует взаимодействие с базами данных при помощи объектов. Профит в том, что отсутствует привязка к конкретной системе управления базами данных. PDO поддерживает СУБД: MySQL, PostgreSQL, SQLite, Oracle, Microsoft SQL Server и другие.
Почему стоит использовать PDO
Тестовая база данных с таблицей
Установка PDO
Проверить доступные драйвера
Соединение с базой данных
Соединения устанавливаются автоматически при создании объекта PDO от его базового класса.
При ошибке подключения PHP выдаст ошибку:
Подготовленные и прямые запросы
В PDO два способа выполнения запросов:
Прямые запросы
Прямые запросы используются только в том случае, если в запросе отсутствуют переменные и есть уверенность, что запрос безопасен и правильно экранирован.
Подготовленные запросы
Как видно, в случае именованных плейсхолдеров в execute() должен передаваться массив, в котором ключи должны совпадать с именами плейсхолдеров. После этого можно извлечь результаты запроса:
Получение данных. Метод fetch()
Получение данных. Метод fetchColumn()
Получение данных. Метод fetchAll()
PDO и оператор LIKE
Работая с подготовленными запросами, следует понимать, что плейсхолдер может заменять только строку или число. Ни ключевое слово, ни идентификатор, ни часть строки или набор строк через плейсхолдер подставить нельзя. Поэтому для LIKE необходимо сначала подготовить строку поиска целиком, а потом ее подставлять в запрос:
Здесь может вознинуть проблема! Поиск может не работать, потому как из базы у вас приходят данные в неправильной кодировке. Необходимо добавить кодировку в подключение, если она там не указана!
PDO и оператор LIMIT
Решение #1 : Отключить режим эмуляции:
PDO и оператор IN
При выборке из таблицы необходимо доставать записи, соответствующие всем значениям массива.
Добавление записей
Изменение записей
Удаление записей
Использование транзакций
Важно! Транзакции в PDO работают только с таблицами InnoDB
В данной заметке мы познакомились с основными понятиями PDO, его установкой, подключением к БД и самые простые возможности выборки, изменения и удаления данных. В следующих заметках мы рассмотрим ещё несколько тем, касающихся PDO.
Connecting to PostgreSQL
Summary: in this tutorial, you will learn how to connect to a PostgreSQL database server using PHP PDO.
Prerequisites
To make a connection to the PostgreSQL database server using PHP PDO, you need to have:
1) PostgreSQL database parameters
Suppose you have the following PostgreSQL database parameters:
The following creates a new database configuration file named config.php that stores the PostgreSQL database parameters:
To use these parameters, you include the config.php file in the script that connects to the PostgreSQL using the require construct.
2) Enable PostgreSQL driver
The PDO_PGSQL is a driver that implements the PDO interface. It allows you to access PostgreSQL databases from PHP.
To check if the PDO_PGSQL driver is enabled, you open the php.ini file. Typically, the php.ini file is located under the php directory. For example, if you use XAMPP on Windows, you can find the php.ini file under the C:\xampp\php directory.
in the php.ini file, you can find the following line:
If you see the comma( ; ) placed at the beginning of the line, it means that the line is commented and the database driver is not enabled.
To enable the driver, you need to uncomment the line by removing the comma ( ; ) like this:
After that, you need to restart the web server to apply the change.
PostgreSQL data source name
The data source name or DSN holds database parameters that enable access to a database system. The data source name of the PostgreSQL consists of the following parameters:
The following shows a DSN that connects to dvdrental database in the local PostgreSQL Server, port 5432:
Connecting to PostgreSQL
The following illustrates how to connect to the dvdrental database in PostgreSQL database server:
How the script works.
The following option instruct PDO to set an error code and throw an exception if an error occurs:
PDO has three exception handling options:
Note that PHP automatically closes the database connection when the script ends. If you want to close the database connection explicitly, you can set the PDO instance to null:
Почему стоит пользоваться PDO для работы с базой данных
Перевод статьи Why you Should be using PHP’s PDO for Database Access.
Множество PHP-разработчиков привыкли использовать для работы с базами данных расширения mysql и mysqli. Но с версии 5.1 в PHP существует более удобный способ — PHP Data Objects. Этот класс, сокращенно именуемый PDO, предоставляет методы для работы с объектами и prepared statements, которые заметно повысят вашу продуктивность!
Введение в PDO
«PDO – PHP Data Objects – это прослойка, которая предлагает универсальный способ работы с несколькими базами данных.»
Поддержка СУБД
Подключение
Способы подключения к разным СУБД могут незначительно отличаться. Ниже приведены примеры подключения к наиболее популярным из них. Можно заметить, что первые три имеют идентичный синтаксис, в отличие от SQLite.
Пожалуйста, обратите внимание на блок try/catch – всегда стоит оборачивать в него все свои PDO-операции и использовать механизм исключений (об этом чуть дальше).
$DBH расшифровывается как «database handle» и будет использоваться на протяжении всей статьи.
Закрыть любое подключение можно путем переопределения его переменной в null.
Больше информации по теме отличительных опций разных СУБД и методах подключения к ним можно найти на php.net.
Исключения и PDO
PDO умеет выбрасывать исключения при ошибках, поэтому все должно находиться в блоке try/catch. Сразу после создания подключения, PDO можно перевести в любой из трех режимов ошибок:
Но стоит заметить, что ошибка при попытке соединения будет всегда вызывать исключение.
PDO::ERRMODE_SILENT
Это режим по умолчанию. Примерно то же самое вы, скорее всего, используете для отлавливания ошибок в расширениях mysql и mysqli. Следующие два режима больше подходят для DRY программирования.
PDO::ERRMODE_WARNING
Этот режим вызовет стандартный Warning и позволит скрипту продолжить выполнение. Удобен при отладке.
PDO::ERRMODE_EXCEPTION
В большинстве ситуаций этот тип контроля выполнения скрипта предпочтителен. Он выбрасывает исключение, что позволяет вам ловко обрабатывать ошибки и скрывать щепетильную информацию. Как, например, тут:
В SQL-выражении есть синтаксическая ошибка, которая вызовет исключение. Мы можем записать детали ошибки в лог-файл и человеческим языком намекнуть пользователю, что что-то случилось.
Insert и Update
Вставка новых и обновление существующих данных являются одними из наиболее частых операций с БД. В случае с PDO этот процесс обычно состоит из двух шагов. (В следующей секции все относится как к UPDATE, так и INSERT)
Тривиальный пример вставки новых данных:
Вообще-то можно сделать то же самое одним методом exec(), но двухшаговый способ дает все преимущества prepared statements. Они помогают в защите от SQL-инъекций, поэтому имеет смысл их использовать даже при однократном запросе.
Prepared Statements
Использование prepared statements укрепляет защиту от SQL-инъекций.
Prepared statement — это заранее скомпилированное SQL-выражение, которое может быть многократно выполнено путем отправки серверу лишь различных наборов данных. Дополнительным преимуществом является невозможность провести SQL-инъекцию через данные, используемые в placeholder’ах.
Ниже находятся три примера prepared statements.
Первый пример здесь лишь для сравнения, его стоит избегать. Разница между безымянными и именными placeholder’ами в том, как вы будете передавать данные в prepared statements.
Безымянные placeholder’ы
Здесь два шага. На первом мы назначаем всем placeholder’ам переменные (строки 2-4). Затем назначаем этим переменным значения и выполняем запрос. Чтобы послать новый набор данных, просто измените значения переменных и выполните запрос еще раз.
Если в вашем SQL-выражении много параметров, то назначать каждому по переменной весьма неудобно. В таких случаях можно хранить данные в массиве и передавать его:
Именные placeholder’ы
Здесь тоже можно передавать массив, но он должен быть ассоциативным. В роли ключей должны выступать, как можно догадаться, имена placeholder’ов.
Одним из удобств использования именных placeholder’ов является возможность вставки объектов напрямую в базу данных, если названия свойств совпадают с именами параметров. Вставку данных, к примеру, вы можете выполнить так:
Преобразование объекта в массив при execute() приводит к тому, что свойства считаются ключами массива.
Выборка данных
FETCH_ASSOC
При этом формате создается ассоциативный массив с названиями столбцов в виде индексов. Он должен быть знаком тем, кто использует расширения mysql/mysqli.
Цикл while() переберет весь результат запроса.
FETCH_OBJ
Данный тип получения данных создает экземпляр класса std для каждой строки.
FETCH_CLASS
При использовании fetch_class данные заносятся в экземпляры указанного класса. При этом значения назначаются свойствам объекта ДО вызова конструктора. Если свойства с именами, соответствующими названиям столбцов, не существуют, они будут созданы автоматически (с областью видимости public).
Если ваши данные нуждаются в обязательной обработке сразу после их получения из базы данных, ее можно реализовать в конструкторе класса.
Для примера возьмем ситуацию, когда вам нужно скрыть часть адреса проживания человека.
При создании объекта все латинские буквы в нижнем регистре должны замениться на x. Проверим:
Если в базе данных адрес выглядит как ’5 Rosebud’, то на выходе получится ’5 Rxxxxxx’.
Конечно, иногда будет требоваться, чтобы конструктор вызывался ПЕРЕД присваиванием значений. PDO такое тоже позволяет.
Теперь, когда вы дополнили предыдущий пример дополнительной опцией (PDO::FETCH_PROPS_LATE), адрес видоизменяться не будет, так как после записи значений ничего не происходит.
Наконец, при необходимости можно передавать конструктору аргументы прямо при создании объекта:
Можно даже передавать разные аргументы каждому объекту:
Другие полезные методы
Хотя эта статья не может (и не пытается) охватить все аспекты работы с PDO (это огромный модуль!), оставить без упоминания следующие несколько функций нельзя.
How to Use PostgreSQL PDO Driver with PHP Part 1
Introduction
This tutorial will explain how to connect PHP to PostgreSQL with the PDO driver and create the PHP project structure with Composer, a dependency-management tool in PHP. Compose allows for verifying the libraries a project requires and it will install and update the libraries as needed. Be sure all the prerequisites are properly in place before beginning the exercises in this tutorial.
Prerequisites to Connect PHP to PostgreSQL with the PDO Driver.
The result should resemble the following in a Windows system:
Execute the following command to start the PostgreSQL server:
Now execute the following command to verify the service is running:
The result should resemble the following:
PDO and PHP Data Objects
The PHP data objects, or PDO, defines a lightweight, unified interface for accessing the relational databases, or RDB, in PHP. Each database defines the driver specific to that database that implements the PDO interface. Each driver can also reveal the database-specific functions as a normal extension of the functions.
How to Create the PHP Project Structure with Composer
This section will explain how to use Composer to create the project-directory structure.
Create a folder and name it something meaningful, in this case the folder will be named for the project directory as “postgreSQL_php”.
Create a sub-folder and name it “control.” Then create a json file named composer.json and put the following json script inside the control file:
The above script handles the mapping of every class that will be created and added to the PostgreSQL namespace.
NOTE: The PHP Standard Recommendations isPSR-4: Improved Autoloading for using FQCN in a file path.
The above Composer command will download the declared libraries within the composer.json file and will generate an autoload file. Composer will also create a folder named vendor and insert all of the third-party libraries in it. However, in this case no third-party library was specified so composer will only generate the autoload file. The results should resemble the following.
To verify the following file was created, use the ls command. The results should resemble the following:
How to Create a PostgreSQL Database
Execute the following command in the terminal to create a database where the connection can be tested later:
Execute the following command, in sequence, to verify the database was successfully created:
The result should resemble the following:
How to Connect PHP to the PostgreSQL Database
With the project and the database properly set up, add functionalities to the files that were created in the previous section.
The Configuration for config.ini
Open the config.ini using the nano editor and add the following configuration by executing the following command:
Now add the following PostgreSQL database parameters:
How to create the PHP code for the connection.php
Now create a PHP class named Connection inside the connection.php file with the same process used in the previous section. However, this time edit the connection.php file using nano with the following commands:
Now add the following PHP script in the connection.php:
/**
* Represents the Connection
*/
class Connection <
/**
* Connect to the database and return an instance of PDO object
* @return PDO
* @throws Exception
*/
public function connect ( ) <
The above code is a bit lengthy. Here is a breakdown:
A singleton class Connection class was used. This will create only one instance and if an instance already exists while trying to create a new one, the class returns the reference to the old instance.
Before connecting to a PostgreSQL database a new PDO instance class must be created.
The PHP code for the index.php
Below is the PHP script of the index.php file:
use PostgreSQLPHPConnection as Connection ;
With the connection setup, now update the autoload files using the following command:
NOTE: Be sure to be in the project root directory when executing the above command.
How to Test the PostgreSQL Connection with PHP
With the PHP scripts and configuration set up, test the new program using the built-in Webserver, however, this feature is only available in PHP versions 5.4 and above. Navigate to the project directory and run the following command:
The results should resemble the following:
The results should resemble the following:
Conclusion
This tutorial covered how to connect PHP to PostgreSQL with the PDO driver. The article explained PDO and PHP data objects and how to create the PHP project structure with Composer. The tutorial also covered how to create a PostgreSQL database, how to connect PHP to the PostgreSQL database, how to create the PHP code, a breakdown of the code and how to test the PostgreSQL connection with PHP. Remember that testing the PostgreSQL connection using the built-in Webserver can only be done in PHP versions 5.4 and above.
Pilot the ObjectRocket Platform Free!
Try Fully-Managed CockroachDB, Elasticsearch, MongoDB, PostgreSQL (Beta) or Redis.