php обрезать массив по количеству
array_slice
(PHP 4, PHP 5, PHP 7, PHP 8)
array_slice — Выбирает срез массива
Описание
Список параметров
Обратите внимание, что параметр offset обозначает положение в массиве, а не ключ.
Возвращаемые значения
Возвращает срез. Если смещение больше длины массива, то будет возвращён пустой массив.
Примеры
Пример #1 Пример использования array_slice()
Результат выполнения данного примера:
Пример #2 Пример использования array_slice() с одномерным массивом
Результат выполнения данного примера:
Пример #3 Пример использования array_slice() с массивом из смешанных ключей
Результат выполнения данного примера:
Смотрите также
User Contributed Notes 19 notes
Array slice function that works with associative arrays (keys):
function array_slice_assoc($array,$keys) <
return array_intersect_key($array,array_flip($keys));
>
array_slice can be used to remove elements from an array but it’s pretty simple to use a custom function.
One day array_remove() might become part of PHP and will likely be a reserved function name, hence the unobvious choice for this function’s names.
$lunch = array(‘sandwich’ => ‘cheese’, ‘cookie’=>’oatmeal’,’drink’ => ‘tea’,’fruit’ => ‘apple’);
echo »;
?>
(remove 9’s in email)
Using the varname function referenced from the array_search page, submitted by dcez at land dot ru. I created a multi-dimensional array splice function. It’s usage is like so:
. Would strip blah4 from the array, no matter where the position of it was in the array ^^ Returning this.
Array ( [admin] => Array ( [0] => blah1 [1] => blah2 ) [voice] => Array ( [0] => blah3 ) )
?>
Check out dreamevilconcept’s forum for more innovative creations!
based on worldclimb’s arem(), here is a recursive array value removal tool that can work with multidimensional arrays.
function remove_from_array($array,$value) <
$clear = true;
$holding=array();
If you want an associative version of this you can do the following:
function array_slice_assoc($array,$keys) <
return array_intersect_key($array,array_flip($keys));
>
However, if you want an inverse associative version of this, just use array_diff_key instead of array_intersect_key.
function array_slice_assoc_inverse($array,$keys) <
return array_diff_key($array,array_flip($keys));
>
Array (
‘name’ = ‘Nathan’,
‘age’ = 20
)
Array (
‘age’ = 20,
‘height’ = 6
)
To save the sort order of a numeric index in the array. Version php =>5.5.26
/*
Example
*/
array_reorder($a,$order,TRUE);
echo »;
/** exemple end **/
?>
If you want to remove a specified entry from an array i made this mwethod.
$int = 3 ; //Number of entries in the array
$int2 = 0 ; //Starter array spot. it will begine its search at 0.
$del_num = 1 ; //Represents the second entry in the array. which is the one we will happen to remove this time. i.e. 0 = first entry, 1 = second entry, 2 = third.
I was trying to find a good way to find the previous several and next several results from an array created in a MySQL query. I found that most MySQL solutions to this problem were complex. Here is a simple function that returns the previous and next rows from the array.
Sometimes you need to pick certain non-integer and/or non-sequential keys out of an array. Consider using the array_pick() implementation below to pull specific keys, in a specific order, out of a source array:
array_splice
(PHP 4, PHP 5, PHP 7, PHP 8)
array_splice — Удаляет часть массива и заменяет её чем-нибудь ещё
Описание
Обратите внимание, что числовые ключи в массиве array не сохраняются.
Список параметров
Если параметр length опущен, будут удалены все элементы начиная с позиции offset и до конца массива.
Если length указан и он положителен, то будет удалено именно столько элементов.
Если параметр length отрицателен, то конец удаляемой части элементов будет отстоять на это количество от конца массива.
Если length задан как 0, ничего удалено не будет.
Если передан массив replacement в качестве аргумента, тогда удалённые элементы будут заменены элементами этого массива.
Обратите внимание, что ключи массива replacement не сохраняются.
Возвращаемые значения
Возвращает массив, содержащий удалённые элементы.
Список изменений
Примеры
Пример #1 Примеры использования array_splice()
Результат выполнения данного примера:
Пример #2 Примеры использования array_splice()
Следующие выражения эквивалентны:
Смотрите также
User Contributed Notes 39 notes
first search the array index you want to replace
here 1 in array_splice above represent the number of items to be replaced. so here start at index ‘1’ and replaced only one item which is ‘green’
array_splice() does not preserve numeric keys. The function posted by «weikard at gmx dot de» won’t do that either because array_merge() does not preserve numeric keys either.
Use following function instead:
/*
Output:
Array
(
[295] => Hello
[123] => little
[58] => world
)
*/
?>
It preserves numeric keys. Note that the function does not use a reference to the original array but returns a new array (I see absolutely no reason how the performance would be increased by using a reference when modifying an array through PHP script code).
just useful functions to move an element using array_splice.
// info at danielecentamore dot com
You cannot insert with array_splice an array with your own key. array_splice will always insert it with the key «0».
Array (
[row1] => Array (
[col1] => foobar!
[col2] => foobar!
)
[row2] => Array (
[col1] => foobar!
[col2] => foobar!
)
[0] => Array (
[colX] => foobar2
)
[row3] => Array (
[col1] => foobar!
[col2] => foobar!
)
)
But you can use the following function:
Array (
[row1] => Array (
[col1] => foobar!
[col2] => foobar!
)
[row2] => Array (
[col1] => foobar!
[col2] => foobar!
)
[rowX] => Array (
[colX] => foobar2
)
[row3] => Array (
[col1] => foobar!
[col2] => foobar!
)
)
The position «0» will insert the array in the first position (like array_shift). If you try a position higher than the langth of the array, you add it to the array like the function array_push.
When trying to splice an associative array into another, array_splice is missing two key ingredients:
— a string key for identifying the offset
— the ability to preserve keys in the replacement array
This is primarily useful when you want to replace an item in an array with another item, but want to maintain the ordering of the array without rebuilding the array one entry at a time.
If you want to append null values wrap them in an array:
array_splice with preserve keys
array_splice dynamically updates the total number of entries into the array. So for instance I had a case where I needed to insert a value into every 4th entry of the array from the back. The problem was when it added the first, because the total number was dynamically updated, it would only add after the 3rd then the 2nd and so one. The solution I found is to track the number of inserts which were done and account for them dynamically.
Splicing with NULL as replacement may result in unexpected behavior too. Typecasting NULL into an array results in an empty array (as «(array)NULL» equals «array()»). That means, instead of creating an element with value NULL just no new element ist created (just as if there was no replacement specified).
If you want the splicing to create a new element with value NULL you have to use «array(NULL)» instead of NULL.
You should expect this if you read the explanation carefully, but just as objects are considered as a special case for replacement, NULL should be too.
The explanation of replacement better should read: «If replacement is just one element it is not necessary to put array() around it, unless the element is an array itself, an object or NULL.»
A reference is made to INSERT’ing into an array here with array_splice, however its not explained very well. I hope this example will help others find what took me days to research.
// 1,2,3,blue,4,5
?>
Remember that you are telling the array to insert the element into the KEY position. Thus the elements start with key 0 and so on 0=>1, 1=>2, 2=>3, 3=>blue, 4=>4, 5=>5. And walla, you’ve inserted. I can’t say if this is of any value for named keys, or multidimensional arrays. However it does work for single dimensional arrays.
$returned should be an empty array as nothing was returned. This would have substance if you were doing a replace instead.
A comment on array_merge mentioned that array_splice is faster than array_merge for inserting values. This may be the case, but if your goal is instead to reindex a numeric array, array_values() is the function of choice. Performing the following functions in a 100,000-iteration loop gave me the following times: ($b is a 3-element array)
array_splice($b, count($b)) => 0.410652
$b = array_splice($b, 0) => 0.272513
array_splice($b, 3) => 0.26529
$b = array_merge($b) => 0.233582
$b = array_values($b) => 0.151298
In PHP 4.3.10, at least, it seems that elements that are inserted as part of the replacement array are inserted BY REFERENCE (that is, as though with the =& rather than = assignment operation). So if your replacement array contains elements that references to variables that you can also access via other variable name, then this will be true of the elements in the final array too.
In particular, this means that it is safe to use array_splice() on arrays of objects, as you won’t be creating copies of the objects (as it is so easy to do in PHP 4).
Good point about the code not doing what you expected.
The failure to check for the insert case like you pointed out is not a bug, however. I didn’t add code to handle that because the key of such an added index is more or less undefined in an unordered associative array. Put another way, if your array is associative and not auto-indexed, you most likely care enough about your keys to want to set them explicitly.
After reading KoKos’ post above, I thought that the code I posted right before his should do what he wanted. However, my original post neglected to note the little «Tip» in the documentation above, about a single element replacement.
If one changes the lines in my code above that says:
Sorry for the omission.
It may seem obvious from the above posts, but cost me a bit of
braindamage to figure this out.
The following code:
$t=array(‘a’,’b’,’c’,’d’,’e’);
var_dump($t);
Someone might find this function usefull. It just takes a given element from the array and moves it before given element into the same array.
Sometimes you may want to insert one array into another and just work on with the resulting array. array_splice() doesn’t support this, as the resulting array isn’t the returned value but the first argument, which is changed by reference.
$input = [[5=>»richard=red»], [15=>»york=yellow»], [25=>»gave=green»], [30=>»battle=blue»], [35=>»in=indigo»], [40=>»vain=violet»]];
array_splice($input, 2, 0, [[10=>»of=orange»]]);
var_dump($input);
array (size=7)
0 =>
array (size=1)
5 => string ‘richard=red’ (length=11)
1 =>
array (size=1)
15 => string ‘york=yellow’ (length=11)
2 =>
array (size=1)
10 => string ‘of=orange’ (length=9)
3 =>
array (size=1)
25 => string ‘gave=green’ (length=10)
4 =>
array (size=1)
30 => string ‘battle=blue’ (length=11)
5 =>
array (size=1)
35 => string ‘in=indigo’ (length=9)
6 =>
array (size=1)
40 => string ‘vain=violet’ (length=11)
Removing elements from arrays
To remove elements from an array, based on array values:
Using array_splice when you traverse array with internal pointer’s function reset the array, eg:
Maybe it will help someone else: I was trying to strip off the last part of an array using this section, more or less as follows:
To split an associative array based on it’s keys, use this function:
Hope this helps anyone!
Как обрезать массив в PHP
Всем добрый день, сегодня мы вновь начинаем рассматривать очередную тему посвященную языку PHP, а конкретно работу с массивами, и я расскажу Вам, как обрезать массив в PHP. Думаю, Вы уже знакомились ранее с функцией, которая относится к работе со строками под названием substr? Если знакомы, то просто замечательно, а если нет, то можете прочитать статью на моем сайте, и тогда Вы поймете сегодняшнюю тему с полслова. Итак, мы представим с Вами, что у нас имеется массив, в котором присутствуют некоторые данные, но все данные нам в нем не нужны, а нужна лишь какая-то их последовательность. И у Вас возникает задача, как можно получить эту последовательность, и желательно как можно быстрее и удобнее. Такую задачу я предлагаю решить ваш при помощи функции array_slice. Данная функция может вырезать определенную последовательность элементов массива, благодаря трем параметрам. Первый параметр отвечает за массив, который будет вырезан, второй указывает, с какого элемента должна начинаться последовательность, и третий параметр отвечает за количество элементов, которые будут находиться в этой последовательности. А теперь давайте рассмотрим пример:
Данный пример показывает лишь принцип работы изучаемой функции, а не относится к практической работе. Поэтому рассказываю действия, которые были мной проделаны. Мы создали массив, поместив в него, пять значений. Создаем переменную, в которой будет храниться первый результат выполнения функции array_slice, и работаем с ней. Первым параметром указываем созданный нами массив, вторым параметром задаем, с какого элемента начинаем вырезать массив, не забываем, что отсчет идет с нуля. Третий параметр мы не указывали, а означает это, что вырезаться массив будет от первого элемента и до конца массива, если же задать какое-либо число, как например, во втором примере, то оно будет означать количество вырезаемых элементов. Также возможно указывать отрицательные параметры, тогда отсчет будет производиться от конца строки. Для этого я Вам и привел три различных примера. После всех манипуляций, мы просто поочередно выводим каждый результат, на который вы можете посмотреть.
Думаю, теперь Вам все стало довольно понятно, особенно если Вы знали ранее такую функцию как substr, но если Вы ей никогда не пользовались, то для Вас все равно не составит огромного труда разобраться с нашей темой. На этом у меня все, до скорого.
5 последних свежих статей:
Методы alert, prompt, confirm в JavaScript
И снова я приветствую Вас в очередной теме посвященной языку JavaScript, в которой мы разберем методы alert, prompt, confrim.
Конструкция switch-case в JavaScript
Всем привет, сегодня мы рассмотрим с Вами конструкцию switch-case в языке JavaScript.
Всплывающая подсказка на CSS
Здравствуйте дорогие друзья, сегодня мы с Вами изучим еще одну тему посвященную языку CSS. И научимся реализовывать всплывающие подсказки на CSS.
Псевдокласс target в CSS
Сегодня мы рассмотрим еще одну возможность, которую предоставляет нам CSS3, а именно поговорим о псевдоклассе target, для чего он нам может быть нужен, и рассмотрим один из самых популярных способов его применения.
Как вставить видео с YouTube
Довольно часто Вы видите на различных ресурсах видео, которое хранится на сервисе youtube, но каким-то образом его можно воспроизвести на данном сайте. Об этом сегодня пойдет речь, и я расскажу Вам, как вставить видео с YouTube.
Php обрезать массив по количеству
В этом разделе помещены уроки по PHP скриптам, которые Вы сможете использовать на своих ресурсах.
Фильтрация данных с помощью zend-filter
Когда речь идёт о безопасности веб-сайта, то фраза «фильтруйте всё, экранируйте всё» всегда будет актуальна. Сегодня поговорим о фильтрации данных.
Контекстное экранирование с помощью zend-escaper
Обеспечение безопасности веб-сайта — это не только защита от SQL инъекций, но и протекция от межсайтового скриптинга (XSS), межсайтовой подделки запросов (CSRF) и от других видов атак. В частности, вам нужно очень осторожно подходить к формированию HTML, CSS и JavaScript кода.
Подключение Zend модулей к Expressive
Expressive 2 поддерживает возможность подключения других ZF компонент по специальной схеме. Не всем нравится данное решение. В этой статье мы расскажем как улучшили процесс подключение нескольких модулей.
Совет: отправка информации в Google Analytics через API
Предположим, что вам необходимо отправить какую-то информацию в Google Analytics из серверного скрипта. Как это сделать. Ответ в этой заметке.
Подборка PHP песочниц
Подборка из нескольких видов PHP песочниц. На некоторых вы в режиме online сможете потестить свой код, но есть так же решения, которые можно внедрить на свой сайт.
Совет: активация отображения всех ошибок в PHP
При поднятии PHP проекта на новом рабочем окружении могут возникнуть ошибки отображение которых изначально скрыто базовыми настройками. Это можно исправить, прописав несколько команд.
Агент
PHP парсер юзер агента с поддержкой Laravel, работающий на базе библиотеки Mobile Detect.
Есть надобность обрезать массив от начала и до n
Есть надобность обрезать массив от начала и до n.
суть проблемы такая. foreach обрабатываю массив. по истечении 28 секунд php файл перезапускается. Вот и надо для нового выполнения скрипта обрезать массив на отработанные в предыдущем запуске элементы. сейчас идет пустая переборка массива до нужного мне элемента и потом продолжается выполнение действия с элементами. Но как оказалось на практике это не выход.
Помощь в написании контрольных, курсовых и дипломных работ здесь.
Обрезать QByteArray с начала
Вот есть некий QByteArray Можно ли как-то обрезать несколько первых байт? Кроме как использовать.
Обрезать строку до начала цифр
Добрый день! Есть кучка строк вида по раб.дн.
Как обрезать строку с начала и конца?
Добрый день, помогите пожалуйста с такой проблемой в report server, есть имя тега skv_1080h.min не.
Если число Х есть в массиве, то вычислить сумму элементов массива от начала массива до последнего вложения этого числа в массив
Дан массив целых чисел, заданых случайным образом из диапазона от 29 до 35 и число Х из этого.
спасибо за оперативность gbsoftware, тока что нашел. эксперементирую)
Добавлено через 1 час 2 минуты
array_slice работает хорошо с примерами. простыми массивами.