there is not enough available space on your disk drive как исправить

«There is not enough free space on partition (C:)» error when you try to upgrade to Windows 7, Windows Server 2008 R2, or Windows Server 2012

Symptoms

When you try to upgrade from Windows Vista to Windows 7, from Windows Server 2008 to Windows Server 2008 R2, from Windows Server 2003 to Windows Server 2008 R2, or from Windows Server 2008 R2 to Windows Server 2012, the upgrade fails.

In this situation, you receive the following error message:

The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue.

There is not enough free space on partition ( drive:). A total of space_size megabytes (MB) of free disk space is required. Try Disk Cleanup, or moving files to an external location such as a CD, DVD, or external hard drive, and then restart the installation.

This problem does not occur during the new client setup experience for Windows 8.

Cause

This problem occurs when the size of the virtual memory paging file falls below the recommended limit. Windows upgrade requires that the page file be the recommended size and that sufficient space be available on the drive to accommodate a default sized page file. By default, Windows stores the paging file on the system volume. Therefore, there is insufficient free space on the system volume when you try to upgrade to Windows 7, Windows Server 2008 R2, or Windows 2012.

Resolution

To resolve this problem, use one of the following options.

Option 1: Free up space on the system volume

Use Disk Cleanup, or try to move files to an external location such as a CD, DVD, or external hard disk drive. Then, restart the installation. Make sure that required free space is available on the system drive.

To free up space on your hard disk, Disk Cleanup finds and then removes temporary files on your computer that you decide you no longer need. If you have more than one drive or partition on your computer, you are prompted to select the drive that you want Disk Cleanup to clean.

To start Disk Cleanup, click Start , click All Programs, click Accessories, click System Tools, and then click Disk Cleanup.

Option 2: Move the paging file to another volume

Log on to the computer as Administrator.

Click Start, right-click Computer, and then click Advanced system settings.

In the System Properties dialog box, click the Advanced tab, and then click Settings under Performance.

In the Performance Options dialog box, click the Advanced tab, and then click Change.

Click to clear the Automatically manage paging file size for all drives check box.

In the Drive [Volume Label] list, click a drive other than the one on which Windows is installed (typically, this is drive C). Under Total paging file size for all drives, note the value that is displayed next to Recommended.

Check the Custom size box, and then type the recommended value in the Initial size (MB) box.

Type the maximum size that you want to allow for paging in the Maximum size (MB) box, and then click Set.

In the Drive [Volume Label] list, click the drive on which Windows is installed, click to select the No paging file check box, and then click Set.

Click Yes when you are prompted.

Click OK three times, and then restart the computer.

Источник

Solved: Not Enough Space On C Drive Windows 10/8/7

If you find there is not enough space on C drive in Windows 10, 8, 7, here you can find the best way to solve this problem easily, no matter you want to reclaim some free space or add more space to C drive.

By AOMEI / Last Updated May 14, 2021

Not enough space on C drive

Many Windows users may find that the C drive is full without reason sometimes, or the C drive is getting full day after day. The computer may notice you that there is not enough space on C drive. At this time, the C drive will not big enough, and you may not be able to perform software updates/upgrades, program installation. What’s more, the operating system will run slowly. And you cannot store more data/files due to smaller storage space. So, free up the disk space of C drive is necessary.

Why there is not enough space on C drive

Many users may be puzzled about reason of “not enough space on C drive”. What is taking up space on the C drive? In general, the main reason for the low disk space problem is that the C drive is occupied by a large number of files, and the free space is very limited. If you saved large files to C drive that you are not aware of (For example, the default download folder is located in C drive), the space of C dive will get not enough too. Besides, some page files, temporary files, and other system files may take up space on the system partition.

Solutions of “not enough space on C drive” in Windows 10/8/7

Don’t know how to solve the problem of “not enough space on C drive”? Here provides you several solutions to free up the disk space of C drive.

Solution 1. Deleted hibernate file

Windows reserves about half of the RAM space for the hibernation file. If the computer RAM is 8GB, the hibernation file is about 4GB in size. The steps of delete hibernate file is:

1. Go to start menu, type “cmd” and right click it to run as administrator.

2. Type “powercfg.exe-h off” and press “Enter”.

Then, you will see a few more gigabytes of free space on system drive.

Solution 2. Clean disk

You can also free up space of C drive by empty it.

1. Click “Start”, type “disk” in the search box and select “Disk Cleanup”.

2. In the “Disk Cleanup”, select the drive you want to clean up. Here is C drive. Click “OK”.

3. After that, it will calculate how much space you will be able to free on C drive.

4. Finally, choose to delete files you do not need.

Solution 3. Uninstall some programs

Windows has many built-in programs (especially in Windows 10), and you may never use some of them. So, you can uninstall the programs that you do not actually need. And you can also uninstall the programs that won’t be needed in the future to free up space.

1. Click the start button.

2. Then, click “Control Panel” > “Programs” > “Programs and Features”.

Then, you can right click on the program you want to uninstall and select Uninstall.

Solution 4. Move programs from C to another drive

If you don’t want to uninstall or remove any programs, you can try to move them to another drive with much free space. Thus, you can use the AOMEI Partition Assistant Professional. This software provides the «App Mover» feature, allowing you to transfer Apps between different storage space and make sure they load successfully in the destination location. Free download it and have a try.

Step 1. Install and run AOMEI Partition Assistant Professional. Click «All Tools» > «App Mover».

Step 2. Choose C drive and click «Next».

Step 3. Select apps you want to move, choose the destination path and click on «Move».

Step 4. Click «OK» on the pop-up window.

Solution 5. Extend C drive without data loss

If there is still not enough space on C drive after all the solutions above, you can try the next method. Usually, there will be extra free space on other partitions. And you can add some space to system partition from another partition on the same hard drive. But howВ to allocate free space from other partition to C drive. Here AOMEI Partition Assistant Professional is highly recommended, whichВ can help solve the problem: not enough space on the disk windows 7/8/10 without data loss. The following example will show you the specific steps of using the free space in D drive to extend C drive:

Step 1.Install and run AOMEI Partition Assistant Professional. Right click the D drive and select “Allocated Free Space”.

Step 2. In the pop-up window, you can allocate free space from D drive to C drive. And click “OK”.

Step 3. Finally, click “Apply” to execute the progress.

Tips: If you encounter the problem c drive full, you can also use another function of AOMEI Partition Assistant – Merge Partitions to solve the issue too.

Verdict

Now, you know to deal with the problem not enough space on C drive. Besides Allocated Free Space, AOMEI Partition Assistant Pro also provides you many other useful functions like Wipe Hard Drive, Partition Recovery Wizard and so on. If you want to install Windows to USB someday, AOMEI Partition Assistant can help you too. If the operating system of your computer is Windows Server, please turn to AOMEI Partition Assistant Server to enjoy more advanced features.

Источник

.NET Framework 4.5 Won’t Install «Not enough Disk Space on Your Drive. «

«There is not enough disk space on your drive for the new files to be uncompressed and installed. Please run this application again after you have freed some space on your drive.»

I freed up some space yesterday and I thought it would help (I erased 10 GB Worth of Temporary Files, Logs, Downloads, etc.)

and it still says not enough. It says 360 GB Free of 465 GB and I am seriously confused. If anyone could help me step by step, feel free to ask questions 😀

I’m using a Windows 7 Home Basic with Service Pack 1, 64-Bit Computer if it helps.

Report abuse

Thanks for the additional information. We’re here to help.

The troubleshooting procedures provided by Monica were great.

Here’s an additional solution. Which is a step by step procedure on how to perform an In-place upgrade. Once the In-place upgrade is done, you can try to install the .NET Framework 4.5. Performing a repair installation will restore the current Windows installation to the version of the installation DVD. This also requires the installation of all updates that are not included on the installation DVD.

Note It takes the same amount of time to do the upgrade as to reinstall the operating system. Also, some of your customized Windows settings may be lost through this process.

Note Performing a repair installation will not damage files and applications that are currently installed on your computer.

To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

Источник

Ошибка «There is not enough space available on the disk(s) to complete this operation» при попытке выполнить сжатие дискового тома NTFS на хосте виртуализации Hyper-V с Windows Server 2012 R2

Работа с операционной системой Windows Server не бывает скучной, так как, порой, можно получить сюрприз с загадкой в самом неожиданном месте. Казалось бы, что можно ожидать от привычной функции, которую уже приходилось использовать десятки раз. С таким, абсолютно невозмутимым настроем, на одном из хостов виртуализации Hyper-V на базе Windows Server 2012 R2 я решил выполнить сжатие дискового тома NTFS (Shrink Volume) с ОС, чтобы освободить немного места на конце диска.

Стандартным способом, используя консоль Disk Management, я попытался выполнить сжатие выбранного NTFS тома.

Свободного места на томе было более чем достаточно, и было решено отрезать 10GB.

Однако, к моему удивлению, возникла ошибка, говорящая о нехватке доступного места для проведения операции » There is not enough space available on the disk(s) to complete this operation «

Повторная попытка провести операцию сжатия привела к той же ошибке.

Обратившись к консоли Event Viewer, было обнаружено, что в логе Windows Logs\Application в момент попытки сжатия фиксируется предупреждение с кодом 260 из источника Defrag с сообщением » Error: during volume shrink initiated on volume C: we failed to move a movable file extent «. В этом событии в деталях диагностической информации фигурирует отсылка на некий файл last unmovable file, который, как я понял, и препятствует перемещению дискового кластера.

Возникло подозрение, что удаление указанного файла, возможно решило бы проблему с невозможностью сжатия диска. Но что это за tmp-файл такой, да ещё и в системном каталоге, понимания пока не было. Попытка вручную удалить файл завершилась ошибкой » Access is denied «.

Стало понятно, что либо файл удерживается каким-то процессом, либо имеет какие-то хитрые разрешения. Прежде чем погружаться в дальнейшее изучение вопроса с проверкой прав доступа и вычислением процесса, блокирующего доступ к файлу, сделал быстрый заход в поисковую систему по маске имени файла vmg.tmp и тут же нашёл одну интересную ветку обсуждения. Намёк в сторону управляющего процесса Hyper-V, порождающего временные файлы типа vmg.tmp при работе с ISО-образом компонент интеграции, привёл меня в лог Microsoft\Windows\Hyper-V-VMMS\Storage, который оказался переполнен ошибками типа:

Это напомнило мне ранее описанную ситуацию с невозможностью обновления ISO-образа компонент интеграции из-за того, что файл образа %windir%\system32\vmguest.iso был занят запущенной виртуальной машиной.

И действительно, просмотрев свойства виртуальных машин, запущенных на хосте, было обнаружено, что в одной из ВМ был подключен ISO-образ компонент интеграции.

Отключение данного ISO-образа из свойств виртуальной машины привело к исчезновению недоступного для удаления временного файла.

После чего была предпринята новая попытка сжатия диска, которая на этот раз прошла успешно.

В ходе выполнения операций сжатия в Application-логе событие из источника Defrag оповестило об успешной оптимизации перед непосредственным процессом усечения тома.

На этом дело о неработающем сжатии можно было считать закрытым, но при этом остался осадок изумления от самой возможности появления причинно-следственной связи между, казалось бы, несвязанными обстоятельствами – установленным в свойствах виртуальной машины образом компонент интеграции и неработающим сжатием системного тома NTFS.

Комичность всей описанной ситуации дополняет то, что в самом начале, когда я получил ошибку невозможности сжатия, в качестве профилактического мероприятия была выполнена дефрагментация тома и утилита дефрагментации с честными глазами сказала мне, что теперь на томе всё красиво.

Источник

Fixed: There Is Not Enough Space on the Disk in Windows 7, 8 or 10

In this post, there are four ways about how to deal with «There is not enough space on the disk to complete this operation» issue.

By Ivy / Last Updated April 15, 2021

The error: There is not enough space on the disk

You may encounter an error “There is not enough space available on the disk(s) to complete this operation” while doing some operations such as create/shrink/extend/format partition, and convert to GPT disk or dynamic volume and so on using Disk Management in Windows 10/8/7. Well, what does this error mean?

Generally, this type of error can emerge while creating a new simple volume, shrinking partition, or converting to dynamic disk. Here, I’ll list them in the following one by one.

☞ «There is not enough space on the disk to complete this operation create partition.»

This error occurs when you delete partition and get free space instead of unallocated space. In that case, you need to delete free space and create partition with unallocated space. Besides, you can create partition with a partition manager.

☞ «There is not enough space on the disk to complete this operation while shrinking partition.»

If the volume you want to shrink containing unmovable files in the middle of the disk, you cannot shrink volume. Also, if there are page files or unmovable/locked system files at the end of drive, you will receive there is not enough space on the disk error.

☞ «There is not enough space on the disk to complete this operation convert to dynamic disk.»

You can’t convert to dynamic disk if you do not have at least 1MB unallocated space at the end of disk which is used to create the database for the dynamic disk. This space is reserved when you create a partition or volume in Windows 2000 or XP Professional. But it does not work in other operating systems.

To fix the error, you need to shrink the last partition and create a space for database. Besides, you still use partition manager to directly convert basic disk to dynamic disk.

в–Є «There is not enough space on the disk to complete this operation extend partition.»
в–Є «There is not enough space on the disk to complete this operation format partition.»
в–Є «There is not enough space on the disk to complete this operation delete partition.»
в–Є «There is not enough space when converting to GPT disk.»

What does there is not enough space mean? In general, it means you have insufficient disk space for operations, the hard drive is almost full and Windows is unable to perform further actions. Then, what can you do to fix it?

Fix there is not enough space available on the disk effectively

In Disk Management, there are many limitations than you can expect. You cannot waste time on solving problems continuously. You are supposed to turn to some free third-party partition tools like AOMEI Partition Assistant Standard, helping you finish all the tasks in Disk Management and fix problems caused by Disk Management.

Note that errors that happen under different circumstances that require different solutions.

в–¶ Fix the error that occurs while creating partition

To fix this error, you can delete free space and create partition with unallocated space.

Step 1. Press Win + R to summon the Run window, type diskmgmt.msc in the box and hit OK to open Disk Management.

Step 2. Right-click the free space, click Delete Volume, and then follow the wizard until the last step.

Step 3. Right-click the unallocated space, click New Simple Volume, and then follow the wizard to finish the rest of the steps.

в–¶ Fix the error that occurs while shrinking partition

If you receive not enough space error while shrinking, you can try Rescan disks to reload disks and see if it works.

Step 1. Open Disk Management, click Action at the top, and then select Rescan Disks from the list.

Step 2. Shrink volume again after the disk is reloaded.

Besides, you still can use free partition manager AOMEI Partition Assistant to resize partition. It’s much easier.

в–¶ Try disk defragmenter to free up disk space

Sometimes, fragment pieces at the end of volume may cause this problem. You can run disk defragmenter to fix it. Note that it is not suggested to perform disk defragmenter on SSD disks.

Step 1. Type disk defragmenter in the search box and select it from the searching result.

Step 2. Choose disk you want to defragment section, click Analyze disk button, and check fragment percentage. If the percentage exceeds 10%, you should run the defragment.

Step 3. Click the Defragment disk button to start the process. Type password if the operation requires.

в–¶ A tested way to solve there is not enough disk space on your drive thoroughly

Now, I’ll show you how to fix not enough space error with free alternative software AOMEI Partition Assistant. As mentioned above, it can help you finish all tasks that you cannot complete in Disk Management.

You are supposed to download free partition manager – AOMEI Partition Assistant first and then select the feature as shown in the following picture based on your error.

For partition or volume, you can right-click the volume and then click Create Partition, Delete Partition, Format Partition, Resize Partition. В For disk, you can right-click the disk and select Convert to GPT Disk or Dynamic Disk Converter.

Next, I’ll take Convert to GPT Disk as an example to show you the detailed steps.

Step 1. Launch AOMEI Partition Assistant, right-click the disk you want to convert to GPT disk, and select Convert to GPT Disk from its context menu.

Step 2. Click OK to confirm that you want to convert disk from MBR to GPT disk.

Step 3. Click Apply and then Proceed to start the pending operation.

Tips: To convert system disk to GPT without losing data, please upgrade to AOMEI Partition Assistant Professional and higher.

Summary

Usually, Disk Management is a great tool in managing hard drives and partitions in Windows 10/8/7. Nevertheless, you may get the type of “There is not enough space on the disk” error while performing some specific operations, like shrinking or converting.

In those cases, it is a wise move to turn to other powerful equivalents like AOMEI Partition Assistant. It would help you avoid many unnecessary troubles. The free edition, Standard, is more than adequate for basic operations.

However, if you’re an administrator of a company or an expert that wants to do more advanced operations, it is welcome to upgrade to Professional or Unlimited edition to try.

Источник