mouse not captured in remote desktop session hyper v как исправить
Не захвачен ввод мыши Hyper-V»
3 ответов
действия для решения этой проблемы:
в случае, если кто-нибудь столкнется с этим:
на Windows Server 2008 32bit необходимо установить пакет обновления 2 для подключения Hyper-V (Вы не будете иметь интеграции мыши или сети при базовой установке, и вы не можете установить компакт-диск интеграции Hyper-V без SP2) Проще всего установить пакет обновления 2 с помощью монтирования CD ISO (ISO называется mu_windows_vista_sp2_x86_x64_ia64_dvd_x15-39754.iso на MSDN) Примечание: Windows Server 2008 R2 64bit не имеет этой проблемы, но я не мог найти R2 32bit на MSDN.
Если у вас нет MSDN, я думаю, вы можете получить автономную установку для SP2 и» записать » ее на виртуальный диск для создания ISO.
PS-Это было весело, пытаясь сделать вещи в виртуальной консоли без сочетания клавиш, как Alt + Tab
удаление «Virtual PC Integration Components» в виртуальной машине решило это для меня. Одно дополнение, хотя: при удалении он попросил установочный компакт-диск / файлы. Для решения этой проблемы выполните следующие действия:
-найдите iso-файл, который вы первоначально использовали для установки функций интеграции;
имя файла: IntegrationComponents.iso
вероятное местоположение: C:\Program файлы (x86)\Windows Virtual PC\компоненты интеграции\
-В Hyper-V Диспетчер выберите параметры виртуальной машины. Вставить IntegrationComponents.iso в виртуальную станцию cd / dvd через аппаратное обеспечение; IDE controller 1
-(Re)удалить «Virtual PC Integration Components»
Mouse not captured in remote desktop session hyper v как исправить
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Asked by:
Question
This is a silly little problem, but on my 2008 server I installed a Hyper-V virtual machine (a Win 2008-64 system), and I can’t get it to capture the mouse.
Integration services are installed and the mouse is listed but I can’t capture it. I’ve tried Ctrl Alt right arrow.
I’m used to VmWare and this is my first time with Hyper-V.
All replies
I can’t click on anything on the virtual machine connection. I get a window that pops up and says «Mouse not captured in Remote Desktop session». «The mouse is available in a Remote Desktop session when integration services are installed in the guest operating system. «
Also, in the lower right of the window, it shows «Keyboard input captures» and «mouse input not captured» when I hover over the icons.
Also, In Hyper-V Manager, if I right click on the virtual machine and go to «Settings», it shows the «Integration Services», «all services offered».
The keyboard works fine, I can tab around and type in the VM window.
Are you 100% sure that Integration Services is installed:
for Hyper-V i suggest to use the Hyper-V forum instead this one:
for Hyper-V i suggest to use the Hyper-V forum instead this one:
Ok, thanks. I didn’t know there was a Hyper-V forum.
Is the issue continues?
If you have a Windows Server 2008 with Hyper-V enabled, and the virtual machine is Windows Server 2008 X64, after you create the virtual machine, you don’t need to install the Integration Services, and the virtual machine will capture the mouse even if you remote desktop into the remote Hyper-V computer and then manage the virtual machine there use Hyper-V Manager.
Please boot the Hyper-V computer to see whether you get the same issue. Please also check whether you get the same issue with other virtual machines.
Mouse not captured in remote desktop session hyper v как исправить
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Asked by:
Question
This is a silly little problem, but on my 2008 server I installed a Hyper-V virtual machine (a Win 2008-64 system), and I can’t get it to capture the mouse.
Integration services are installed and the mouse is listed but I can’t capture it. I’ve tried Ctrl Alt right arrow.
I’m used to VmWare and this is my first time with Hyper-V.
All replies
I can’t click on anything on the virtual machine connection. I get a window that pops up and says «Mouse not captured in Remote Desktop session». «The mouse is available in a Remote Desktop session when integration services are installed in the guest operating system. «
Also, in the lower right of the window, it shows «Keyboard input captures» and «mouse input not captured» when I hover over the icons.
Also, In Hyper-V Manager, if I right click on the virtual machine and go to «Settings», it shows the «Integration Services», «all services offered».
The keyboard works fine, I can tab around and type in the VM window.
Are you 100% sure that Integration Services is installed:
for Hyper-V i suggest to use the Hyper-V forum instead this one:
for Hyper-V i suggest to use the Hyper-V forum instead this one:
Ok, thanks. I didn’t know there was a Hyper-V forum.
Is the issue continues?
If you have a Windows Server 2008 with Hyper-V enabled, and the virtual machine is Windows Server 2008 X64, after you create the virtual machine, you don’t need to install the Integration Services, and the virtual machine will capture the mouse even if you remote desktop into the remote Hyper-V computer and then manage the virtual machine there use Hyper-V Manager.
Please boot the Hyper-V computer to see whether you get the same issue. Please also check whether you get the same issue with other virtual machines.
Mouse not captured in remote desktop session hyper v как исправить
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Asked by:
Question
This is a silly little problem, but on my 2008 server I installed a Hyper-V virtual machine (a Win 2008-64 system), and I can’t get it to capture the mouse.
Integration services are installed and the mouse is listed but I can’t capture it. I’ve tried Ctrl Alt right arrow.
I’m used to VmWare and this is my first time with Hyper-V.
All replies
I can’t click on anything on the virtual machine connection. I get a window that pops up and says «Mouse not captured in Remote Desktop session». «The mouse is available in a Remote Desktop session when integration services are installed in the guest operating system. «
Also, in the lower right of the window, it shows «Keyboard input captures» and «mouse input not captured» when I hover over the icons.
Also, In Hyper-V Manager, if I right click on the virtual machine and go to «Settings», it shows the «Integration Services», «all services offered».
The keyboard works fine, I can tab around and type in the VM window.
Are you 100% sure that Integration Services is installed:
for Hyper-V i suggest to use the Hyper-V forum instead this one:
for Hyper-V i suggest to use the Hyper-V forum instead this one:
Ok, thanks. I didn’t know there was a Hyper-V forum.
Is the issue continues?
If you have a Windows Server 2008 with Hyper-V enabled, and the virtual machine is Windows Server 2008 X64, after you create the virtual machine, you don’t need to install the Integration Services, and the virtual machine will capture the mouse even if you remote desktop into the remote Hyper-V computer and then manage the virtual machine there use Hyper-V Manager.
Please boot the Hyper-V computer to see whether you get the same issue. Please also check whether you get the same issue with other virtual machines.
question
Hyper-V VM mouse input not captured
It’s blocking me from entering Enhanced Session mode.
People said that I need to install Virtual pc integration components, but I can’t find it on my settings.
I have a wireless mouse.
2 Answers
Now I’ve found that VMBus had an error. It says that vmbusr.sys didn’t start. How can I solve this?
For the VMBus error, please check if the following article could help:
Thanks for your time!
Best Regards,
Anne
If the Answer is helpful, please click «Accept Answer» and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.
I just purchased Windows 10 Pro (Formally I was using Home version) on the Host, cleaned up my C drive, installed everything again!
Now I got my RDP session instead of Hyper-V native session, and everything is going perfect. Thank you so much for getting along with me, and giving me advice.
Have a nice day!
Please use RDP to connect to the VM, when connecting, please try to check the box like below, check if it could work:
Thanks for your time!
Best Regards,
Anne
If the Answer is helpful, please click «Accept Answer» and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.