You are not permitted to interact with grass как исправить
Minecraft Forums
Groupmanager/Permissions not working right. «You are not permitted to use, interact. ston_plate, dirt..etc»
Hello i have just recently created my server and i have been doing fine until now. I was getting prepared to begin allowing users to enter the server, when i encountered this problem.
«You are not permitted to use, interact. «. It seems when i de op, i can not touch or do anything. (when i am op, i can) This is a problem. i would like to permit new user or just the guest group to follow their set permissions..Ideally i would like all groups to work right.
The code for the GroupManager config.yml file is:
world:
world_nether:
— users
— groups
world_the_end:
— users
— groups
all_unnamed_worlds:
— users
— groups
guest:
guest:
— users
Additionally, there are four separate folders within «/groupmanager/worlds/guest, mainland (my main world), world, all_unnamed_worlds
The code for «groups.yml» located inside Groupmanager/worlds/guest is:
# Group inheritance
#
# Any inherited groups prefixed with a g: are global groups
# and are inherited from the GlobalGroups.yml.
#
# Groups without the g: prefix are groups local to this world
# and are defined in the this groups.yml file.
#
# Local group inheritances define your promotion tree when using ‘manpromote/mandemote’
groups:
guest:
default: true
Permissions:
— randomtp.portal*
— essentials.build*
— essentials.help
— essentials.kits.guest
— essentials.build.interact.
Info:
build: true
prefix: ‘[Guest]’
I have set build to true, and gave the permission node to build and interact, yet in the game it seems these permissions are not working. However, i would like to add that the code must not be all wrong becuase the prefix ‘[guest]’ does appear in the game for the guest group.
Пишет на моем серваке майна you are not perrmitted to interact with
groups:
User :
default: true
permissions:
— modifyworld.*
— essentials.build
— essentials.give
— essentials.kit
— essentials.spawn
— essentials.home
— essentials.back
— essentials.back.ondeath
— lwc.protect
— simplehomes.homes
— simplehomes.otherhomes
— simplehomes.multihomes
— commandbook.spawn
— commandbook.who
— commandbook.say
— commandbook.msg
— commandbook.call
— commandbook.time.check
— commandbook.rules
— worldedit.wand
— worldedit.selection.pos
— worldedit.selection.expand
— worldguard.region.claim
— worldguard.region.addowner.own.*
— worldguard.region.removeowner.own.*
— worldguard.region.addmember.own.*
— worldguard.region.list.own
— worldguard.region.wand
Admins:
default: false
inheritance:
permissons:
— ‘*’
Vip:
default: true
permissons:
— commandbook.rules
— commandbook.time.check
— worldedit.navigation.jumpto
— worldedit.navigation.thru
Moderator:
group:
— Moder
permissions:
— worldedit.wand
— worldedit.selection.pos
— worldedit.selection.expand
— worldguard.region.claim
— worldguard.region.addowner.own.*
— worldguard.region.removeowner.own.*
— worldguard.region.addmember.own.*
— worldguard.region.lis-t.own
— worldguard.region.wand
Как исправить ошибку «Operation not permitted» в Терминале в MacOS Mojave
Если вы часто пользуетесь командной строкой Mac, то могли сталкиваться с ошибкой «Operation not permitted» в Terminal после установки MacOS Mojave 10.14. Ошибка возникает даже после простейших команд, как «ls», «mv» и «cp», а также после стандартных команд. Из-за этой ошибки использовать командную строку в MacOS Mojave сложно, если вообще возможно. Не беспокойтесь, исправить её возможно.
Ниже мы расскажем, как исправить ошибку «Operation not permitted» в Terminal для Mac OS Mojave 10.14.
Как исправить ошибку «Operation not permitted»
Если вы пока не сталкивались с этой ошибкой, скорее всего, вы просто не запрашивали доступ к папкам и файлам с ограничениями. Ошибка может возникать даже при работе с обычными папками. Можете проверить сами, выполнив в программе запрос:
До того, как вы выполните инструкцию выше, в окне программы появится ошибка «Operation not permitted».
После выполнения инструкции окно Terminal будет выглядеть так:
Есть и второй способ исправить данную ошибку. Первый мы описали выше. Вы также можете отключить систему «System Integrity Protection», но мы не рекомендуем делать это без необходимости. Можете также почитать нашу инструкцию, как исправить ошибку «command not found» в Terminal.
I have been experiencing A LOT of permission issues when using VS code with Windows 10.
It doesn’t work with or without admin rights.
I went to the folder containing all my repos, set the ownership to me, applied full control to all authenticated users, and it still doesn’t work.
EDIT: It does work sometimes, that’s what make it very strange
11 Answers 11
I encountered the error message when renaming or moving files in VS Code. I then noticed that it was the same in Windows Explorer.
When I stopped the watch command, that solved the issue and I was able to rename and move files in VS Code without any problem.
So I think there are some processes that hold your files. I hope this can help.
I had this issue as well. The cause in my case appeared to be the «Angular Language Service» extension.
I killed that in the extensions pane and was able to rename the file immediately.
Unfortunately, the problem still persists when Angular Language Server is enabled.
If you use the Jest VSCode extension and a test file is located in the folder you’re trying to rename, it might not work without disabling the Jest runner.
I faced the same issue while doing a react project. At first, I thought I need to give admin rights but that also didn’t work. Later I found that My project was hosted on my localHost. So, If your project is running we can’t change the folder structure. You need to quit the server before updating the folder structure.
Solution: Quit the Localhost Server and try again(For React and Angular Users). You can also try restarting the VScode.
I encountered Error: EPERM: operation not permitted, rename while having the live server of the Live Server extension running. After stopping the live server the renaming operation was possible again.
As silly as it sounds, this error also happens when a file’s ‘read-only’ flag is set for any reason; in my case it was copying the entire VSCode folder from a read-only host-share to a VM. It doesn’t matter whether you have full admin rights or not, if file is read-only VSCode cannot change it. As for open files, you can use SysInternals’ Process Explorer tool to find out which process has an open handle to a particular path or file.
Just close the vscode and do any file operations in file explorer. I still rename my files using this way, perhaps this is an unsolved bug.
The solution that worked for me was to open Vscode as admin.
In short, when this problem happen, it has to be some kind of CLI or Extension that is holding up the resources.
SOLUTION: Restart PC and try renaming or removing your folder again, it should work.
In my case it was a nested folder. Manually creating the top folder and moving it’s contents was allowed. (imports were still automatically updated)
Just to add to this wall of answers, this is pretty clearly a very context dependent problem, I initially assumed this was something to do with vscode or my windows permissions but actually it was a problem with my deletion script.
Initially my script was something like this:
And this worked for most of my time with this project. until I decided to make subfolders in the products directory at which point node attempted to unlink the directories and this error was raised. Couldn’t figure out why this was happening even after rebooting my PC :/